How to disable Wi-Fi on the WG3526

In some situations, users may not want the Wi-Fi to be available. With the WG3526, the Wi-Fi signal can be turned off all together. To do so, follow these instructions:

In your web browser, go to the address

The default password is: admin

1) Click on Networks to expand the tab.

2) Click Wireless to open the wireless settings.

3) On the right side, you will see two options for the wireless (you'll see the SSID option listed), simply click the Disable button on the right of both listings.

4) Click Save & Apply button and it will save the option and then spend up to 90 seconds to apply those settings.

You will now see the Wi-Fi is no longer on and not visible to devices.

To turn Wi-Fi back on, simply repeat this process, only clicking Enable which is now showing in the place the Disable option was earlier.

If you have any questions, contact Digicom support and we'll be glad to help.

  • 0 Users Found This Useful
Was this answer helpful?

Related Articles

Change Wifi SSID / Password / Encryption type

Changing the WiFi SSID, Encryption Type, and Password for WG3526 STEP 1: From your...

WG3526 APN Settings (Only for Blue 750 Plan)

If your device is factory reset, it may wipe out the necessary APN settings (Connection...

How can I monitor my monthly data usage? (WG2526)

The WG3526 that is running our Rooter Firmware, can monitor the data usage. While it is not a...

What is the WAN port on the WG3526?

The WG3526 has 4 Gigabit LAN ports that are used as a network switch for hardwiring devices to...

Getting Diagnostic Signal Information to find the best spot at your location.

With a connected device, use a web browser and go to: Enter the password: adminand...